1、煙氣流程采用三回程形式,對稱濕背式結構,爐膽為波形爐膽,輻射受熱面積大,并有效消除爐膽熱應力,火箱對稱偏心結構,對流段煙管采用螺紋管或光管,內插有擾流子,優化傳熱
2、采用先進的燃燒器,火力控制器,并有火焰檢測,自動吹掃,熄火保護功能,煙氣中的有害成分低于國家標準(N×排放量低400mg/m3)屬于環保產品。
3、可選用先進觸摸屏+PLC控制器,數碼監控系統,具有定時控制,工作記錄、檢漏報警,壓力保護、溫度控制、缺水保護等功能,并可增設廠家定時鎖,可預留上位機通訊接口實現集成控制。
4、完美的造型設計、結構獨特、明快的外觀、優雅的色澤,時尚且超值。
5、100mm硅酸鋁保溫氈+鏡面反射玻璃棉保溫,外敷1.0mn彩鋼板表皮,美觀大方。
6、排煙口可選配冷凝換熱器,冷凝煙氣中的水蒸氣吸收凝結潛熱,從而提高鍋爐的熱效率。
7、合理設計燃燒機接口及前后煙箱等高溫熱傳導部位,確保爐體外表面溫度符合設計規范。
8、鍋爐整體出廠,集壓力安全附件于一體,安裝簡便。
1.The flue gas flow adopts a three-return mode and a symmetricalwet-back structure the Internal furnace of the boiler is a waveforminternal fuenace the radical heating area is large and the thermalstress of the internal furnance is effectively elimainated; a fire box isan eccentric symmertrical stucture ascrewed conduit or a plain tubes used as the smoke tube of the convection section a turbolator isinserted inside the smoke tube to optimize heat transmission.
2. Advanced burner and fire controller are adopted, thus having thefunctions of flame monitoring, automatic sweeping as wellas flameout protection; the harmful components In the smoke gas are lowerthan the national standard( the exhaust of Nox is lower than400mg/m3) therefore the bearing hot water boiler belongs to anenvironmentf-friendly product.
3. Advanced touch screen and pl controller and advanceddigItal checking-controlling system are adopted, thus having thefunctions of regular control, work recording work, leakage checkingand alarming preesure protecting temperature control, deaquationprotection, etc. Moreover, the timing lock of the manufacturer can beadditionally arranged; the communication interface of an uppercomputer can be preserved to realize integration control.
4. The bearing hot water boiler has perfect style design, specialstructure, vivid oppearance, elegant color, is fashionable and hassuper values.
5. 100mm aluminum silicate insulation quilt and the reflectiveglass wool on the surface of the quilt are adopted for heat insulationa 1.0mmcolor plate coating is covered on the outside, thus beingbeautiful and elegant.
6. The condensing heat exchanger can be selectively arranged onthe exhaust pot; the steam in the condensing smoke gas absorbs thelatent.
7.The high temperature thermal tramal transmission parts likethe interface of the bu rner the front smoke box and the back boxare reasonably designed to ensure the temperature of the outersurface of The boiler body to meet the design code.
8.The boiler is entirely delivered and integrates preesure andsafety accessories together thus being simply and convenientlymounted.